MakerRobo Up



Availability : YES




 

Quick Overview

The MakerRobo is designed for the best user experience in 3D printing. With its easy operational and user friendly printing procedures, you’ll start printing your dreams into reality right away. The performance of our 3D printer is out of the ordinary and its reliability is out of the question. Our printer is designed and assembled to challenge every available 3D printer in the market considering its usability and price range. With its 49 decibel low operational noise it’s quiet a machine and it fits in almost every environment.


 

Printing
Print Technology: Fused Filament Fabrication (FFF)
Build Volume: 200 x 200 x 200 mm 180 x 180 x 180 mm (recommended) 512 in3 volume
Layer Resolution: 60 micron (High) 100 micron (Medium) 200 micron (Low)
Hot End: E3D V6, MK8 and Own Brand
Nozzle Diameter: 0.3mm 0.4mm 0.5mm
Heated Bed: 12V 214mm x 214mm x 214mm Mk2a or Mk2b
Cooling Fan: 12V 40mm x 40mm cooling fan
Supportive Print Materials: 1.75mm PLA, ABS, Nylon, PTEG(For Flexible and Wood Filament support, Contact Us)
Speed: Upto 150mm/sec
Software: Repetier-Host, Pronterface, Slic3r (Any Open Source 3D Printing Software)
File Types: STL / OBJ
Supports: Windows 8.1/7/Vista (32 bit/64 bit) Linux Mac OS X (10.6.6 64bit)
Electronical
AC INPUT: 110V/220V,5-10 AMPS,50-60 Hz,231 watt max
Power Requirements: 12V DC @ 9.2 AMPS
Connectivity: USB 2.0 & Stand-Alone Printing From LCD SD-Card
Warranty: 12 Months Service.



Besides premium quality hardware and optimized software for 3D printing, there are a lot of essential accessories that comes with the “MakerRobo” 3D Printer. All the following parts should be in the box, please check contents.

3D Printer (1 pc)
Filament Spool (1kg Roll)
Spool Holder and Filament Guide (1 set)
Glue Stick (1 pc)
Power Cable (1 pc)
USB Cable (1 pc)
Test Printed Object by this Printer (2 pcs)
Hex Wrenches (2 pcs)
Binder Clips (4 pcs)
Glass Bed (1 pc)
Alcohol Pad (5 pcs)
Nuts and Bolts (Spare Sets)
8GB SD Memory Card
Memory Card Reader
User Manual

 

Safety:

WARNING: The "MakerRobo" 3D Printer generates high temperature and contains fast moving mechanical parts which may cause injury or damage. Please follow the guidelines carefully to operate the printer safely. We assume no liability for any loss or injury caused by operating the "Our Printer Name" 3D Printer.

 

• Provide sufficient clear space around the printer to permit free motion of moving parts, including the front-back movement of build platform, the up-down movement of X-axis assembly, and the rotation of filament spool.
• When the printer is in operation, never touch moving parts, including belts, pulleys, motor shafts, rail carriages, and lead screws.
• Never touch the extruder nozzle and heated bed without turning off the power and allowing them to completely cool down.
• Always power off the printer and disconnect USB cable before any service or troubleshooting operation.
• Always discharge yourself by touching a grounded source before touching the electronics.
• Never leave flammable materials near printer.
• Place the printer in a well-ventilated area for printing with ABS filaments.

Leave a Reply